|
Grid Antenna
Specifications:
| Frequency range |
2400 - 2500 MHz |
| VSWR |
+/-1.4 |
| Input Impedance |
50 Ohms |
| Gain |
23.5 dB |
| Polarization |
Horizontal or Vertical |
| Beamwidth (3dB) |
10.5 ° |
| Front to back ratio |
approx 35dB |
| Max power |
100W |
| Lightning Protection |
DC Ground |
| Connector Type |
N-Female |
| Diameter |
0.8m |
| Weight |
4.1Kg |
| Wind Loading Area |
Front - 0.25sqm
Back - 0.07sqm |
| Rated Wind Velocity |
210km/h |
| Azimuth |
90 ° |
| Elevation |
12 ° |
|
Panel Antennas
| Panel Directional Antenna / 16 dB, N-Type Female connector |
| Frequency Range: |
2.4~2.5GHz |
| Gain: |
16 dBi |
| Max Power: |
50W |
| Beam Width: |
30 deg. |
| Size: |
45.4cm x 13.4cm x 3cm |
| Weight: |
0.8Kg |
| Connector: |
N Female |
| Panel Directional Antenna / 8dB, N-Type Female connector |
| Frequency Range: |
2.4~2.5GHz |
| Gain: |
8 dBi |
| Max Power: |
50W |
| Beam Width: |
30 deg. |
| Size: |
10.7cm x 9.4cm x 3cm |
| Weight: |
0.32Kg |
| Connector: |
N Socket Female |
| 8 dB Omni Antenna |
| Product Type: |
Omnidirectional Antenna - specs quoted using 'good' earth. |
| Frequency Range: |
2400-2483MHz |
| Gain: |
8 dBi |
| Polarization: |
Vertical |
| Beanwidth Mhz |
83 |
| Connector: |
N Socket female |
| SWR: |
<=1.5:1 |
| Impedance |
50 Ohms |
| Size: |
L390mm |
| Weight: |
480g |
| 15 dB Omni Antenna 2.4 GHz |
| Omni Antenna |
Specs quoted using 'good' earth. |
| Frequency Range: |
2.4 ~ 2.5GHz |
| Impedance: |
50 Ohms |
| SWR: |
<1.5:1 |
| Gain: |
15 dBi |
| Polarization: |
Vertical |
Beam width:
|
H-plane 360°
E-plane
8° (-3dB points) |
| Connector: |
N Type (Female) |
| Length: |
1m |
| Weight |
1.5Kg |
| Temperature: |
-45°C~+80°C |
Yagi Antennas
| Yagi Antenna / 7 dB, N-Type Female connector |
| Frequency Range: |
2.4~2.5GHz |
| Gain: |
7 dBi |
| Max Power: |
50W |
| Beam Width: |
30 deg. |
| Mast diameter accepted: |
33~43mm |
| Boom Length: |
30cm, 6 Element |
| Weight: |
0.5Kg |
| Connector: |
N Female |
| Yagi Antenna / 16 dB, N-Type Female connector |
| Frequency Range: |
2.4~2.5GHz |
| Gain: |
16 dBi |
| Max Power: |
20W |
| Beam Width: |
30 deg. |
| Size: |
65cm x 14cm x 7.5cm |
| Weight: |
0.75Kg |
| Connector: |
N Female |
| 20 dB Directional Yagi Outdoor Antenna 2.4GHz |
| Omni Antenna |
Specs quoted using 'good' earth. |
| Frequency Range: |
2.4 ~ 2.4835GHz |
| Type: |
Yagi |
| Polarization: |
Linear, Horizontal / Vertical |
| Gain: |
20 dBi |
| VSWR: |
1.5:1 |
Beam width:
(3dB points) |
H-plane 22
E-plane 21 |
| Impedance: |
50 Ohms nominal |
| Connector Type: |
N Type (Female) with link cable |
| Temperature: |
-30°C~+60°C |
| Lightning Protection: |
DC Ground |
| Radome: |
ABS + Brass |
| Dimensions: |
76 x 851 mm |
| Weight: |
1.24Kg |
| Yagi Antenna / 20 dB, N-Type Female connector |
| Frequency Range: |
2.4~2.5GHz |
| Gain: |
20 dBi |
| Max Power: |
50W |
| Beam Width: |
30 deg. |
| Mast diameter accepted: |
33~43mm |
| Boom Length: |
100cm, 20Element |
| Weight: |
1.5Kg |
| Connector: |
N Female |
| Lightning Arrestor |
| Frequency Range: |
0~ 3 GHz |
| VSRW: |
1 : 1.5 Max (0 ~ 3 GHz) |
| Insertion Loss: |
0.5 dBi Max (0 ~ 3 GHz) |
| Impedance: |
50 Ohm |
| Gas Tube DC Breakdown Voltage: |
90 V + - 20% |
| Gas Tube Impulse Breakdown Voltage: |
1000 V + - 20% |
| Gas Tube Insulation Resistance: |
10,000M Ohm |
| Maximum Withstand Current: |
5 KV |
| RF Power Rating (CW): |
10 W Continuous |
| Connectors: |
N-Male to Bulkhead N-Female |
| Connector Body Material: |
Nickel Plated Brass |
| Body Material: |
Nickel Plated Brass |
| Pin Material: |
Gold Plated Brass |
| ¡§O¡¨-Ring Material: |
Rubber |
| Bracket Material: |
Stainless Steel |
| Dimensions (Max): |
80 x 26 x 30 mm |
1. Provide protection toward telecom equipment and electronic circuit
2. Provides stable impulse breakdown voltage.
3. High Insulation resistance.
4. Robust, airtight, and anti-corrosive housing.
5. Radioactivity-fre |
| 2.4GHz 2way Outdoor Splitter |
| Features : |
| This 2.4GHz 2way Outdoor Splitter is used for connecting more than one antenna to a single radio |
| Frequency Range : 2.4 ~ 2.5 GHz |
| Impedance : 50 Ohms |
| Insertion Loss : 0.4dB |
| V.S.W.R. : 1:1.3 Typical |
| Temperature Range : -30° To +70° |
| Power Rating : 20W |
| Connectors : N Type Female (Gold Pin) |
| Dimensions : 77m/m x 55m/m x 42m/m |
| Weight : 326g |
| 2.4GHz 2way Indoor Signal Splitter |
| Features : |
| This 2.4GHz 2way Splitter is used for connecting more than one antenna to a single radio |
| Frequency : 2400 ~ 2500 MHz |
| Insertion Loss : < 0.4dB |
| Impedance : 50 Ohm |
| Ports : 1 Input 2 Output |
| Connectors : N Type Female |
| V.S.W.R. : < 1.3:1 Typical |
| Dimensions : 2.45" x 3.2" x 1.15" |
| Weight : 250g |
| Indoor 0.5W (27dB) Booster for 2.4G Wireless LAN |
| Operating Range: |
2400~2500MHz |
| Operating Mode: |
Bi-directional, half-duplex Time Division Duplex SensesRF carrier from Transmitter and automatically switches Receive to transmit mode |
| Transmit Gain: |
17dB Nominal |
| Frequency Response: |
+\-1dB over operating range |
| Output Power: |
500mw(+27dBm) nominal |
| TX Input Power: |
10dB Nominal |
| Receiver Gain: |
10dB typical |
| Noise Figure: |
3.5dB typical |
| Connectors: |
SMA female pin to radio, reverse-SMA male pin to antenna |
| Lightning Protection: |
Direct DC ground at antenna connector |
| DC Surge Protection: |
At 5 VDC input from transmission cable |
| Power Consumption: |
650mA @ 5V/DC 105~240V AC from power supply |
| Dimensions: |
78(L)mm x 55(W)mm x 29(H)mm |
| Operating Temperature: |
-20°C ~ +70°C |
| Humidity: |
Up to 100% Relative Humidity |
|
|